Full Fix Kernel Stack Inpage Error In Windows 10

BSoD errors, such as KERNEL_STACK_INPAGE_ERROR, can be a big problem since they will crash Windows 10 and restart your computer.

Many BSoD errors are triggered by hardware and software issues. If certain hardware or software isn’t fully compatible with Windows 10, that can cause an error such as the KERNEL_STACK_INPAGE_ERROR to appear.The easiest way to prevent these errors from appearing is to update your OS and to download the latest patches. Many of the patches improve the system security and fix many hardware and software issues so download them as often as you can.If you meet with a BSoD error, there’s no need to worry. Go to our BSoD troubleshooting Hub because you will definitely find a solution there. Windows 10 errors occur pretty often but we know exactly what to do. Find all our guides and solutions in the Windows 10 errors section.

Download Restoro PC Repair Tool that comes with Patented Technologies (patent available here).

Click Start Scan to find Windows issues that could be causing PC problems.

Click Repair All to fix issues affecting your computer’s security and performance

Restoro has been downloaded by 0 readers this month.

These errors can be problematic, therefore today we going to show you how to fix KERNEL_STACK_INPAGE_ERROR error.

Table of contents:

Many Blue Screen of Death errors are caused by hardware and software issues.

For example, if certain hardware or software isn’t fully compatible with Windows 10, that can cause BSoD error such as KERNEL_STACK_INPAGE_ERROR to appear.

The easiest way to prevent these errors from appearing is to use Windows Update and download the latest patches.

Many of these patches improve system security, but at the same time, they also fix many hardware and software issues, therefore, be sure to download them as often as you can.

In order for Windows 10 to recognize and use certain hardware, it’s important that you keep your drivers up to date.

Updating drivers make sure that Windows 10 can successfully recognize and use certain hardware.

And if the driver is outdated, corrupted, or just not compatible with Windows 10, you’ll get a KERNEL_STACK_INPAGE_ERROR BSoD error and your computer will restart.

To prevent these types of problems, it’s crucial to keep all drivers up to date, and you can do that right from the Device Manager by following these steps:

Updating your drivers via Device Manager is simple and straightforward, but it might not be the best solution.

According to users, sometimes Device Manager cannot find and download the latest drivers, therefore if you want to use the latest drivers, you might have to download them manually.

Downloading drivers manually is fairly simple, and in order to do that, you just need to visit your hardware manufacturer’s website, locate your device and download the latest drivers for it.

Keep in mind that you’ll need to find and download drivers for all major hardware components.

2.1 Update drivers automatically

Searching for drivers on your own can be time-consuming. So, we advise you to use a tool that will do this for you automatically.

Advanced software will help you update drivers automatically and prevent PC damage caused by installing the wrong driver versions. 

Plus, managing your drivers with dedicated tools involves optimizing your PC performance with improved functionality of your devices.

In case you want a reliable service that prevents you from system malfunctions or crash errors, the software below is exactly what you need.

⇒ Get DriverFix

If updating your system and drivers didn’t resolve the problem, let’s try Windows 10’s built-in troubleshooting tool.

This tool can help with resolving all sorts of issues, including the BSOD problems, like the KERNEL_STACK_INPAGE_ERROR error.

Here’s how to run the BSOD troubleshooter in Windows 10:

The next troubleshooting tool we’re going to try is the SFC scan. This tool scans your computer through the Command Prompt, in search of potential problems.

If the solution is possible, the SFC scan will automatically resolve it.

Here’s how to run the SFC scan in Windows 10:

Deployment Image Servicing and Management tool is another command-line troubleshooter.

Some PC issues are hard to tackle, especially when it comes to corrupted repositories or missing Windows files. If you are having troubles fixing an error, your system may be partially broken. We recommend installing Restoro, a tool that will scan your machine and identify what the fault is.Click here to download and start repairing.

Expert tip:

SPONSORED

But unlike the previous two, this one completely re-deploys the system image, which can lead to resolving various problems. Including the KERNEL_STACK_INPAGE_ERROR error (hopefully).

We’ll walk you through both standard and the procedure that utilizes the installation media below:

Standard way

Right-click Start and open Command Prompt (Admin).

Paste the following command and press Enter:

DISM /Online /Cleanup-Image /RestoreHealth

Wait until the scan is finished.

Restart your computer and try updating again.

With the Windows installation media

Insert your Windows installation media.

Right-click the Start menu and, from the menu, choose the Command Prompt (Admin).

In the command line, type the following commands and press Enter after each:

dism /online /cleanup-image /scanhealth

dism /online /cleanup-image /restorehealth

Now, type the following command and press Enter:

DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:SourcesInstall.wim:1 /LimitAccess

Make sure to change an X value with the letter of the mounted drive with Windows 10 installation.

After the procedure is finished, restart your computer.

BSOD issues are quite common when there’s something wrong with your hard drive. So, we’re going to check your hard drive for potential problems.

DISM /Online /Cleanup-Image /RestoreHealth

dism /online /cleanup-image /scanhealth

dism /online /cleanup-image /restorehealth

DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:SourcesInstall.wim:1 /LimitAccess

To do that, you need to run the chkdsk command, which will scan all your partitions, and resolve potential problems, if possible.

Here’s how to check the hard drive in Windows 10:

Certain software can also be the cause for KERNEL_STACK_INPAGE_ERROR BSoD error.

bootrec.exe /rebuildbcd

bootrec.exe /fixmbr

bootrec.exe /fixboot

chkdsk /r c:

chkdsk /r d:

This is just our example, so keep in mind that you have to perform chkdsk command for every hard drive partition that you have.

Sometimes your antivirus software can cause this problem, so in order to fix it, it’s advised that you completely remove your antivirus.

In order to completely remove an antivirus program, it’s recommended that you use a dedicated removal tool.

To perform this action correctly and fully uninstall your antivirus program it’s needed to employ the most efficient uninstaller software.

Many security companies offer these tools for their software, and you can download them for free.

According to users, the KERNEL_STACK_INPAGE_ERROR error appears while trying to perform a virus scan using Malwarebytes.

However, to avoid this incompatibility with your antivirus, it’s advised to use the best antivirus software for Windows 10.

According to users, the KERNEL_STACK_INPAGE_ERROR BSoD error can be caused if your hard drive mode isn’t properly set.

Users reported that switching their hard drive mode from AHCI to ATA fixed this error for them, so you might want to try that.

To switch your hard drive mode, you need to enter BIOS and change this setting.

For detailed instructions on how to do that, we strongly advise you to check your motherboard manual for detailed instructions.

Several users reported that the KERNEL_STACK_INPAGE_ERROR error was caused by a hardware problem, mostly related to the hard drive.

To fix this problem, be sure to check if your SATA port is working properly.

Users reported that after connecting their hard drives to a different SATA port on their motherboard, the error was completely resolved.

In addition, be sure to check for any loose connections.

Apparently, this error can be caused if the power cable isn’t properly connected to your hard drive, therefore you need to check if the power cable is firmly connected to your hard drive.

In addition to the power cable, sometimes a faulty SATA cable can cause this error, and users reported that the issue was fixed after replacing the SATA cable.

It’s worth mentioning that almost any other hardware component can cause this error, so make sure that you check your RAM first since it’s the common culprit for these types of errors.

To check your RAM, you need to test RAM modules one by one until you find the one that is faulty.

In addition, you can also use MemTest86+ to perform a detailed scan of your RAM. If your RAM is working properly, be sure to check all other hardware components.

KERNEL_STACK_INPAGE_ERROR is often caused by a minor hardware problem, such as a loose cable, but before you start checking your hardware, be sure to try a few other solutions from this article.

Does each process have its own kernel stack?

BSoD error codes

Email *

Commenting as . Not you?

Comment